Product details
Powerful Filtration, Circulation and Aeration
Keep water clean and moving with the SunSun Internal Aquarium/Pond Filter Pump. This practical submersible filter combines filtration, water circulation and aeration in one convenient unit.
Choose from the JQP-1000F, JQP-1500F or JQP-2500F. Each model provides a different flow rate. Therefore, you can select the right output for your setup.
The three available models provide maximum rated flows of 1000 L/h, 1500 L/h and 2500 L/h. They also feature built-in filter sections for convenient everyday filtration.
Whether you need an internal aquarium filter pump or additional filtration and circulation for a suitable pond setup, the JQP-F range provides several output options in the same practical design.
Strong water circulation
Good circulation helps distribute filtered water throughout an aquarium or pond.
The pump continuously draws water through the filter before returning it to the system.
This water movement can help distribute:
- Oxygen
- Heat
- Nutrients
- Filtered water
In addition, circulation helps move suspended particles towards the filter intake.
Supports aeration
The filter pump can also support aeration.
Its aeration system introduces air into the returning water. As a result, it can create bubbles and additional water movement.
Surface movement also helps improve gas exchange.
However, oxygen requirements vary. Water temperature, stocking levels and existing circulation all affect the amount of aeration required.
Three filter sections
The JQP-1000F, JQP-1500F and JQP-2500F each feature three filter sections.
This provides more filtration area than a basic water circulation pump with a small intake sponge.
The filter sections are also accessible for routine cleaning and maintenance.
Why Choose the SunSun Internal Aquarium/Pond Filter Pump?
Clean water needs effective filtration and good circulation.
The SunSun Internal Aquarium/Pond Filter Pump combines these functions in one submersible unit.
Water enters through the filter section. The filter sponge helps trap suspended waste and debris. Meanwhile, the pump keeps water moving through the system.
The unit can also support aeration. As a result, you get filtration, circulation and aeration from one device.
Better still, three flow options are available. You can choose the model that best matches your aquarium or pond requirements.
Three Flow Options
Different setups need different amounts of water movement.
For that reason, this filter pump is available in three models.
JQP-1000F – 1000 L/h
The SunSun JQP-1000F provides a maximum rated flow of 1000 litres per hour.
It uses 14W of power and has a maximum head height of 1.4 metres.
This is the lowest-flow option of the three models.
JQP-1500F – 1500 L/h
It uses 20W and has a maximum head height of 1.7 metres.
Therefore, it provides a useful middle option.
JQP-2500F – 2500 L/h
The SunSun JQP-2500F provides a maximum rated flow of 2500 litres per hour.
It uses 35W and has a maximum head height of 2.4 metres.
This is the highest-flow option among these three variations.
Built-In Sponge Filtration
The built-in filter sections help remove suspended dirt from the water.
As water moves through the sponge, it can capture:
- Fish waste
- Uneaten food
- Plant debris
- Suspended particles
- Other visible waste
The sponge also provides surface area where beneficial bacteria can grow.
As a result, the filter can support both mechanical and biological filtration.
FAQ
The SunSun Internal Aquarium/Pond Filter Pump is a submersible filtration system. It combines sponge filtration, water circulation and aeration in one convenient unit.
It is available as the JQP-1000F, JQP-1500F and JQP-2500F.
Yes. It works as an internal aquarium filter pump.
The complete filter sits inside the water and provides filtration and circulation.
It can be used for suitable submerged pond filtration and circulation applications.
However, choose the model carefully. Pond volume, fish load and waste levels can significantly affect the amount of filtration required.
The main differences are their flow rate, power, maximum head, physical size and hose adapter size.
The JQP-1000F has the lowest flow. The JQP-1500F provides a middle option. Meanwhile, the JQP-2500F provides the highest flow of the three.
Yes. The filter pump can support aeration through its air intake and water movement.
Surface movement can also improve gas exchange.
Yes. These JQP-F models contain sponge filter sections.
The sponges help trap suspended waste while also providing surface area for beneficial bacteria.
No.
It is a submersible pump and should remain correctly submerged during operation.
Never run the pump dry.
Choose according to water volume, fish load and desired circulation.
The JQP-1000F provides the lowest flow, the JQP-1500F provides a middle option, and the JQP-2500F provides the highest flow.
Yes.
Water circulation can help distribute filtered water and nutrients around a planted aquarium.
However, delicate plants and fish may prefer gentler water movement.
There is no fixed schedule for every setup.
Check the sponge regularly. Clean it when waste builds up or water flow begins to decrease.
A heavily stocked aquarium or pond may require more frequent cleaning.
Reduced flow can be caused by:
- Dirty filter sponges
- Blocked water intake
- Plant debris
- Dirty impeller
- Restricted outlet
- Heavy waste buildup
Clean and inspect these areas before assuming the pump has developed a fault.
Trish –
The filter provides strong water movement and keeps the water much cleaner. The filter sections are easy to access during maintenance and easy to see if its clogged.